Рус | Eng

Equipment

Drilling rigs

Hydraulic drilling rig JD-1500GTR

The high-mobility heavy rig is intended for the blast hole drilling with the drilling diameter up to 150 mm in the surface blast-hole drilling and proved to be successful during construction of gas and oil pipelines, laying of the railway bed and other types of construction. Analogues: Sandvik Pantera 1500. Оставить заявку
Основная информация Спецификация Фото

The JUNJIN company specializes in production of the drilling equipment for the blast hole drilling in earth material. Each rig of our company is equipped with tracked chassis and a driller cabin as well as impact type drilling rig, namely, casing gun. These drilling rigs have a lot of benefits, including automated hose lengthening system, antijamming tool system, thread lubrication, spudding-in system. For the comfort of the operator, these rigs are also equipped with air-conditioner in the reinforced cabin. This equipment

is also equipped with high-quality and high-capacity dust filters.

The hydraulic drilling rig JD-1500GTR proved to be successful during construction of gas and oil pipelines and laying of the railway bed.

This rig is perfectly suitable for open pits with drilling diameter up to 150 mm.

Analogues: Sandvik Pantera 1500

During mining operations and laying of lines, where it is impossible to get solid achievements without special-purpose machines, one of the most required units of the special-purpose machines in this case is the hydraulic drilling rig, that is used for the blast hole drilling.

This rig is equipped with the hydraulic system Bosch Rexroth Germany, produced by the German company Bosch, which is acknowledged as one of the best high-quality brands in manufacturing of the special equipment. The well depth is 25 m, operating pressure of the compressor is about 10.5 atm, and the drilling rate is up to 700 m per day, which is the best option for performing this kind of works.

Also, the hydraulic drilling rig JD-1500GTR is equipped with an antijamming system for the blast hole mechanism and automated hose lengthening system, which is critical to reliability and uninterrupted operation of the equipment. Winter package would secure yourself against the work stoppage in case of various unforeseen circumstances at temperatures below zero.

The original assembly allows strict limiting of fuel consumption and effectively sparing of funds for fuel purchase. The fuel consumption rate needed per one hour of the hydraulic drilling rig operation is about 31 liters. All machines of the JUNJIN company are acknowledged as high-mobility and reliable rigs. The technological capacity of the JD-1500GTR allows overcoming the 30-degrees slopes, that is why this rig can work on a deeply cross-country and, by that, saves your time and money.

 The operator's comfort is provided by the air-conditioner in the control cabin, after all, regardless of the capacity and adaptability to manufacture of the equipment, a great part of the process depends on attention and concentration of the person that controls it.

Basic Settings

  • Borehole diameterfrom 89 mm to 150 mm
  • Compressor14 cubic meter
  • Tool typeGT60 MF

Additional Settings

  • Hydraulic systemBosch Rexroth Germany
  • Drilling depth25m
  • Drilling speed per dayto 700 meters
  • Rock hardness of protodjaconsfrom 4 to 20
  • Estimated fuel consumption35 l/hour
  • Automated length adjustment mastyes
  • Rated motor power325/2200
  • PerforatorJET-15/ YH-200
  • Power perforator25 KW
  • The frequency of perforator impacts2500
  • Rotary speed 0…120
  • Compressor manufacturerGHH RAND Germany
  • Working pressure of the compressor10.5 Bar
  • Dust suppression6 Filters
  • Filtration volume40 m3/min
  • Cassette for rods5+1

 

  • EngineCummiins 8.9 USA
  • weight17.5 tons


 

  • Length of the rod4200 mm
  • Movement speed0~3.6 km/h
  • Gradeability30°
  • Clearance535mm
  • Overall length10.31 m
  • Overall width2.42 m
  • Overall height3.35 m
  • Winter Packageyes
  • Air-conditioning of the operator's cabinyes
  • Automated Stacking Rods Systemyes
  • System of anti-jamming of drilling toolsyes
  • Lubrication system threadingyes
  • Drilling Systemyes
  • Service pneumatic lineyes
no photo
Спасибо за заявку
Ожидайте нашего звонка.